 |
 |
 |
 |
|
| Model | 40 hp | 25 hp | 15 hp | 9.9 hp |
| 0/transom height | ||||
| S | - | 423/16.7 | 440/17.3 | - |
| L | 533/21.0 | 550/21.7 | 567/22.3 | 559/22.0 |
| X | - | - | - | 635/25.0 |
| U | - | - | - | - |
| Weight (Kg) | ||||
| S | - | 62 | 45 | - |
| L | 88.1 | 64 | 47 | 45 |
| X | - | - | - | 45.5 |
| U | - | - | - | - |
| Engine Type | 3-Cyl | 2-Cyl | 2-Cyl | 2-Cyl |
| Displacement (cm3) | 747 | 498 | 323 | 232 |
| Bore x Stroke (mm) | 65x75 | 65x75 | 59X59 | 59X42.2 |
| Output (kw/hp) | 29.4/40 | 18.4/25 | 11.0/15 | 7.3/9.9 |
| RPM | 5000-6000 | 5000-6000 | 4500-5500 | 4000-5000 |
| Compression ratio | 9.87 | 9.87 | 9.27 | 9.3 |
| Scavenging | ||||
| Double Over Head |
- |
- |
- |
- |
| Single Over Head | • | • | • | • |
| Ignition | ||||
| CDI-microcomputer | • | • | ▲ | ▲ |
| TCI |
- |
- |
- |
- |
| Gear ratio | 13:26 (2.0) | 13:27 (2.08) | 13:27 (2.08) | 13:38 (2.92) |
| Operation Method | ||||
| Tiller Handle | • | • | • | • |
| Remote Control |
- |
- |
- |
- |
| Lubrication |
• |
• |
• |
• |
| Starting system | ||||
| Manual | • | • | • | • |
| Electric |
- |
- |
- |
- |
| Trim & tilt method | HT | M | M | M |
| Engine stop switch | • | • | • | • |
| Shallow water drive | • | • | • | - |
| Alternator | 15A | 80W*** | 80W*** | 10A |
| Rectifier regulator | - | • | • | • |
| Start-in-gear prev. | • | • | • | • |
| Overheat warning | • | • | - | • |
| Over-revolution pre. | • | • | • | • |
| Remote control box | - | - | OP | - |
| Tachometer | - | - | - | - |
| Trim meter | - | - | - | - |
| Propeller | OP | • | • | • |
| Fuel tank | OP | OP | OP | OP |
| Tool Kit | OP | OP | OP | • |
| Emergency rope | • | • | • | • |
| Spare Spark plugs | OP | OP | OP | OP |
• :
Standard equipment
OP : optional
equipment
•*
: On the remote control box
•**
: in the digital tachometer
***
: Light coil only (optional: rectifier required for battery charger)
▲ :
CDI-electronic automatic
WRPIT : Wide Range PIT
HT : Hydro
Tilt
M :
Manual Tilt