|
|
|
|
| |
 |
| |
|
|
|
 |
 |
3-POINT CONTACT
SYSTEM
Yamaha's Cruiser Seat, raised handlebars and foot chocks
create a three-point contact system that makes riding more enjoyable
by reducing tension on the driver’s arms and legs. |
REBOARDING STEP
A retractable reboarding step makes it easy to climb back
on the WaveRunner after taking a break for a quick swim or
snorkeling session. |
| The
Powerplant |
TOP |
- The FX Cruiser® is
powered by the Yamaha MR-1™ engine,
the first four-stroke motor designed specifically for personal
watercraft applications. The MR-1 powerplant is a compact,
ultra-lightweight, 140 horsepower, four-cylinder, 998cc, DOHC,
20-valve, liquid-cooled engine for unequalled performance.
- Electronic Fuel Injection (EFI):
Four individually adjustable throttle bodies, throttle position
sensor (TPS) and intake air pressure and air temperature sensors
supply the optimum air/fuel mixture. The results are a smooth,
high power output with low fuel consumption and low exhaust
emissions.
- Specially Designed, One-piece
Cylinder and Crankcase Assembly: Provides tremendous engine
rigidity that's lighter and stiffer than two-piece designs.
- Slant Detection Switch:
Electronic switch stops engine and oil pumps immediately if
watercraft becomes overturned, protecting motor from unwanted
water ingestion.
- High Volume Intake Box: With
water repellent air filter and flame arrestors.
- Dry Sump Lubrication: Uses two
engine oil pumps to deliver lubricated oil to each moving part
with water-jacketed sump and oil backflow protection.
- Yamaha Engine Management System
(Y.E.M.S.): An integrated, computerized management system
that controls and adjusts such functions as ignition timing,
fuel injection mapping, engine diagnostics and OTS. The OTS
function of YEMS activates when the operator releases the
throttle lever and attempts to steer the watercraft. This
assists the operator in turning while the watercraft is
decelerating.
- Independent Water-jacketed Exhaust
Manifolds with Collector: Achieves high power while keeping
noise and exhaust heat under control.
- Thermostatic and Pressure Controlled
Cooling System: Water flow through the engine is controlled
by a thermostat and pressure system and is maintained by a
pressure control valve.
- Electronically Controlled, Variable
Ignition Timing: For exact ignition advance control at all
throttle positions and RPMs.
- Corrosion Protection System:
Sacrificial zinc anodes protect the engine from harmful galvanic
corrosion. Stainless steel fasteners (nuts, bolts, hardware)
provide a long service life. Cylinders, cases and heads are all
treated with a durable oxide coating to form a barrier between
corrosion and expensive engine parts.
|
| The Jet Pump
Propulsion System |
TOP |
- The FX Cruiser's
155mm hyper-flow jet pump propulsion system
with three-blade stainless steel impeller
is designed to maximize water flow for high performance. The FX
pump configuration provides excellent hook-up and smooth
acceleration.
- Reverse: Allows the watercraft to
be backed up off a trailer or out of tight spots where you can
not turn around easily.
- Quick Shift Trim System (Q.S.T.S.):
Mechanically operated, this system offers instant change in the
attitude of the watercraft while underway allowing for tighter
turns or quicker acceleration on plane, as the rider prefers.
Q.S.T.S. offers 24 degrees of total trim range.
- Stainless Steel Impeller Housing
Liner: For high durability, the liner maintains accurate
clearance tolerances between the impeller and the housing.
- High Flow Intake Duct and Grate:
The dynamic shape of these items directs water flow into the
pump for better thrust, performance and hook up.
|
|
The Hull and Deck |
- The FX Cruiser's
Sheet Molded Compound (SMC) hull and deck
is designed specifically for unmatched
luxury, comfort and performance for up to three people. The FX
Cruiser hull is reinforced with a foam-filled SMC liner, which
increases durability and reduces vibration. The FX Cruiser deck
design gives an exciting profile sure to turn heads on and off
the water.
- Integrated Bow Spray Guard:
Reduces bow spray.
- Progressive, Stepper Draft V-Hull
with Integrated Bow Spray Guard: Provides excellent
maneuverability, handling and comfort.
- Performance Sponson Design:
Provides added straight-line comfort and an improved two and
three-up riding experience.
|
|
Additional Features: |
TOP
|
- Yamaha Cruiser
Seat: Yamaha’s innovative Cruiser
seat provides excellent comfort for the passenger and driver.
- Five-step Adjustable Tilt Steering
System: Allows the rider to adjust the steering column angle
from 55 degrees to 35 degrees.
- Multi-function Electronic Information
Center: Provides the operator a quick read on speed, RPM,
fuel level, low fuel warning, low oil pressure warning, battery
voltage, overheat warning, hour meter, check engine light with
self-diagnostic function and the industry's only audible warning
system.
- 26 Gallons of Total Storage:
Includes a large 19.8-gallon cooler, rear storage tub and glove
box.
- Pneumatically-assisted Storage
Compartment: Large 19.8-gallon front compartment, remote
release lever and pneumatic lid support.
- Glove Box with Self-draining Beverage
Holders: The industry's first self-draining beverage
holders.
- Extra Large Boarding Platform:
Provides a stable platform for re-boarding.
- Dual Mirrors: Automotive style
and convenience.
- Finger Throttle Lever: Provides
added comfort while reducing hand fatigue.
- Yamaha's Trademarked Visibility
Spout®: A water spout from the rear of the craft that
improves the craft's conspicuity.
|
|
